Thursday, June 29, 2017

The Benefits of Buying Refurbished Industrial Electrical Components

There are many types of refurbished industrial electrical components which include breaker panels, line switches, bus ducts, bus plugs, fuses, transformers, circuit boards, etc. and they are all durable, affordable and readily available for purchase.

It will amaze you to know that many individuals and businesses can benefit from buying refurbished industrial electrical components instead of purchasing new components or replacing equipment. The term “refurbished” is just used to explain that the equipment has been used and completely redone back to new again. A great deal of satisfaction has been seen by the users of refurbished electrical products because it helps them save up considerable amount of money.

Possibly the biggest benefits of buying refurbished industrial electrical equipments could be seen from the affordability to business owners and individuals equally. Regardless of the task, whether a home appliance repair or industrial-grade breakdown, it is advisable to seek quality refurbished electrical components at affordable prices. Regardless of the electrical problem you are facing the same rules are applicable; seek quality components and equipment at affordable rates.
Suppliers of industrial refurbished components are a common and reliable source of replacement components for manufacturing equipment for many years now. Many buyers choose to buy these types of products from them because they know that they are high quality, affordability and availability of alternatives.

High Quality: Perhaps a part might look new but that doesn’t guarantee that you will get a high quality component. Refurbished components undergo several rigorous overhauling processes and they are always tested to reach and sometimes surpass companies UL certification.

Affordability: Most people are searching for inexpensive electrical components to buy that will serve the purpose and not put a hole in their pocket. Brand new products may perhaps seem perfect but considering the cost and lifespan many buyers will choose to go for refurbished components.

Availability:  This is among the reasons why the sale of refurbished electrical components increased greatly in the past few years. Industrial products are always manufactured to serve longer purpose. Sometimes it is hard to see suppliers who have new components in stock for older products. It is very expensive if you choose to always upgrade a large equipment and sometimes needless as the lifespan of the equipment is far from getting to its peak. Refurbished electrical components are available in clutch as soon as you notice that new parts are out of date.

Alternatives: Whenever any equipment becomes faulty the company loses money. Nobody wants to be in the process of production and unable to repair faulty electrical equipments. Using refurbished components creates variety of alternatives for you at anytime within the refurbished electrical component company. Several refurbished components dealer will have them available or help you in finding the component you really want at an affordable cost with instant availability.
Both companies and individual save money and time when they buy quality refurbished industrial electrical components.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.


Monday, June 19, 2017

Using Bus Ducts and Bus Plugs in Manufacturing

When it comes to the electrical power distribution, a bus duct usually behaves inside a switchboard, dissemination board, and substation. These are normally utilized as a part of the business and industrial setting for inside and outside the establishment. The installation of bus plugs and bus ducts needs to be handled by experts to ensure that the high voltage manufacturing equipment runs on can be handled. A little numbness or wrong installation may bring about instant demise to the safety of the workers running the machinery. Below you will find some basic tips which can truly help guide you through the process of having bus ducts installed within your work environment.
In numerous industries and business offices, bus ducts are introduced in the downstream of the transformer which safeguards them from fault. It is important to remember that where you put the bus plugs and bus ducts must be completely sheltered and secure. You have to protect the equipment from rust and some other unsafe substance.
Bus plugs are basically an electrical attachment similar to an electrical outlet that you would see around your home.  The difference is that in manufacturing these systems need to move about to provide electricity to equipment in different areas of the building at different times.  Each bus plug will be associated with a specific area of bus ducts.  This bolsters power down to whatever it is beneath that should be powered, from lighting frameworks to hardware, whatever the case might be. The colossal advantage of the bus plugs are their ease of adaptability. Since there is no corporal hard cabling to the building, the whole framework can be detached and adjusted to accommodate the arrangement of floor. As new gear comes on the web or plant layouts moved, there's no doubt about how precisely power will be hurry to the new area.
Utilize stainless steel bus ducts and rust proof equipment to increase the safety of bus ducts installed within the establishment.  Utilizing stainless bus duct and rust proof equipment helps to guarantee safety to the workers, the equipment, and the facility on a whole.
Bus ducts should never be settled permanently on the wall.  Bus ducts require attention to this matter.  If left to settle on a wall or floor the apparatus may not function as it should causing inconveniences to the work environment.  It is important that the quality of the products you use to power your machinery matches the quality of the equipment.  Never compromise on quality materials when installing bus ducts and bus plugs.  It is a huge mistake that often occurs in manufacturing facilities; keep this in mind when choosing what to install and what equipment to use within your facility.
At all times professional assistance should be given to the installation and usage of these systems. The fittings are not as stress-free as you may think; nothing is superior to professional help that is highly knowledgeable in this particular field and guarantee the security of work environment.
Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.

Wednesday, June 14, 2017

GST may push up electrical goods’ prices by 10% to 15%

Traders bodies say 28% rate on such items will hit business The selling prices of electrical goods may increase by 10-15% after the implementation of Goods and Services Tax (GST) affecting traders and customers, according to traders. Under the GST, electrical goods will be taxed at 28% as it has been classified as a luxury item. “Electrical goods is not a luxury item, but an essential one,” said Hukmichand Shah, the president of 75-year-old Madras Electric Trades Association (META). “Taxing it at 28% will make it difficult for traders to survive and sustain. While the electrical raw materials are taxed at 18%, the finished goods is placed in the highest tax bracket of 28%.” “The increase in operating cost and selling price is likely to have a cascading effect affecting both the small and medium traders and customers. The Centre should consider the tax implication it might have on the end customers,” said Mr.Shah, who also heads the Federation of Electrical, Electronics and Engineering Trade Association of Tamil Nadu. META has about 1,800 members in Tamil Nadu alone accounting for a consolidated turnover of ₹2,000 crore. Surendra Vyas, general secretary, META said they were not opposed to the implementation of GST but the manner in which it was imposed. “There are several anomalies in the GST as far as electrical goods industry is concerned that has to be addressed on priority basis,” he said. “This is not a peculiar problem for those in Tamil Nadu alone. My counterparts in New Delhi, Mumbai and Kolkata have already sounded the Centre about the anomalies in the rate. Memoranda have been sent to the Union Finance Minister, Finance Secretary and State Finance Minister,” Mr. Shah said. Original Source: http://www.thehindu.com/business/gst-may-push-up-electrical-goods-prices-by-10-to-15/article19029761.ece# Original Author: Special Correspondent Original Date: June 13, 2017