Friday, December 14, 2018

Generator Tap Boxes: Instant Power During Power Outages

No matter what business you are in, be it manufacturing, banking, health care, or education a sudden change in the power situation can be a debacle.  A loss of power means a loss of time, resources, and more so it is imperative to prepare for just such an occasion. 

 To plan ahead to avoid an electrical interruption companies could choose to install a permanent generator. An installed permanent generator can be a large maintenance expense.  To avoid this extra expense the installation of a tap generator is a viable, cost effective option.  When a natural disaster like storms,blackout, and what not a tap generator allows businesses to get your electricity back up and running quickly.

A tap box is a simplistic generator that is installed outside of the business.  It plays the role of connecting the business’s portable generator to the electrical system.  This allows you to get a temporary supply of electricity running to avoid downtime.  This connection can be made either manually or using an automatic transfer switch.  The power is generated so efficiently that it can be up and running without any delay using programable logic circuits and auto start generators.  Your power system will be emergency ready and the cost savings of no down time and not having to hire a professional electrical contractor to temporarily connect power will be pay off the first time the power goes out.  Being prepared ahead of time pays off.

When having a generator tap box installed you will want to assess your electrical needs.  The needs and requirements that your specific business have will vary from even your competition.  Here are some things to consider when choosing a generator tab box.
  • How often do you lose power?
  • What are your electrical needs?
  • What systems are crucial to keep running?
  • What is your budget?
No matter what the answers are to these questions, J & P Electrical will have a solution that fits your exact needs. 
J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers. More information can be found at https://www.jpelectricalcompany.com

Wednesday, November 28, 2018

Choosing Circuit Breakers Over Fuses

In the past fuses were the only option when it came to protecting homes, businesses, and equipment against overloaded circuits, shorts in circuits, and other faults.  With advancements in technology, circuit breakers became a popular option over the use of fuses due to the number of advantages they are able to offer.  The use of modern-day circuit breakers creates increased safety and reliability, decreased costs, and additional support for energy management initiatives.

Benefits of Using Circuit Breakers

Performance Reliability

The performance of fuses can decrease overtime.  Age increases the instances of fault, causing fuses to open even under normal conditions.  There is no way for fuses to be tested thus the current value that causes it to become faulty can never be determined.  Circuit breakers however are tested when manufactured and can be tested throughout its lifetime to ensure peak performance.

Comprehensive Protection

Circuit breakers trip circuit, breaking the electrical connection, up to a thousand times faster than fuses.  The trip capacity of a circuit breaker is greater than the equivalent fuses.  Modern day circuit breakers provide exception fault current limitations which was once only known to occur with fuses.  This function offers reliable protection while increasing the life of equipment by decreasing the aging that occurs with frequently tripped circuits.  Unlike fuses that can experience an overload even when one of multiple fuses opens, this will never occur within a circuit breaker.  When one breaker experiences an overload, the connection will be stopped immediately.

Increased Safety and Production

Replacing fuses can be risky for untrained personnel.  Fuses have exposed conductors and therefore can be quite tricky to change out.  The connections for circuit breakers are hidden, being that it is unexposed it keeps re-connecting the circuit safer for employees.  A major cause of fires within industrial settings occurs because of fuses that were incorrectly replaced.  This could include using the wrong fuse, incorrect model and/or rating, and more.   These issues are almost inconceivable when correcting a tripped connection when using a circuit breaker. The time saved is also considerable when using circuit breakers as reclosing the breaker can occur instantly which prevents production downtime.
Savings
Although the cost of a single fuse is less than the cost of a circuit breaker overall the installation and usage is less expensive.  Consider that three-phrase circuits must have three fuses.  Also, the cost of keeping extra fuses in stock.  Overall operation costs of using fuses instead of a circuit breaker are higher.
More Functionality
Circuit breakers, unlike fuses, can offer additional functions like ground fault protection.  System coordination between breakers, cascading and selectivity cannot occur when using fuses whereas circuit breakers allow for this feature.  Newer technology allows for circuit breakers to use remote controls, have alarm features, offer measurement features, and communication within your network.
J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

Friday, November 9, 2018

Fact or Fiction? What Do You Believe About Reconditioned Electrical Equipment?

There are several common myths surrounding the use of reconditioned electrical equipment and components. Is it really true that with the purchase of refurbished manufacturing equipment and parts can truly save companies time and money while also meeting environment goals?  It is our goal in this installment to debunk several myths that surround the use of reconditioned equipment and parts in the work place.

It is important to note that business decisions should always be based on facts instead of myths.  Many times, myths are just handed down stories and experiences of one user that have been embellished upon throughout the years.  In order to successfully navigate and grow your company it is crucial for companies to make decisions based on facts.  When it comes to being competitive the goal is to find a solution that meets your needs.  Purchasing high quality electrical equipment and components at a reasonable price with little to no down time should be of the highest priority.  

Myth #1: Original Equipment Manufacturers Are the Only Ones That Can Properly Recondition Electrical Parts and Equipment

The biggest difference between public reconditioning companies and private OEM recondition services is the inspection process they must go through to be available for resale.  This is why it is important that you only buy from reputable product reconditioning companies like J and P Electrical Company.

At J and P, you can rest knowing that we only sell the highest quality reconditioned electrical distribution equipment available.   The standards set forth by the experts at J and P are in fact more stringent than any set-in place by OEM manufacturers.  We disassemble each part, cleaning and inspecting each one, replacing parts that need to be replaced as we go along.  They are then painted with high quality paints and acrylic enamel for durability.  Equipment is reassembled and tested until it exceeds manufacturers UL certification standards.

Myth #2: Liability Concerns are Increased with the Use of Reconditioned Electrical Equipment and Parts

When you are purchasing a part does it make you feel better to know it is fresh off the line or that it has been rigorously tested over and over again to ensure its safety?  When you purchase reconditioned parts and equipment from a company like J and P you can rest assured knowing it has been tested two times over, before and after reconditioning, each and every time.  There is less liability involved in products and equipment that have gone through arduous testing.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

Friday, October 19, 2018

Managing Spare Parts in Manufacturing Settings

When it comes to maintaining an inventory of spare parts on hand many companies are reluctant.   There are quite a few in management that wonder if it is counter intuitive while trying to control operating costs.  The goal of all businesses, not just manufacturing, is to reduce expenses while increasing efficiency and many don’t see how keeping spare electrical components on hand helps achieve this goal.  In this installment we will look into how having an inventory of parts on hand eliminates downtime and increases overall effectiveness without extra expense to the company.

Inventory Management

By incorporating spare part management into plant operations managers can successfully create an environment where downtime, caused by machine failure, is practically eliminated.  The biggest struggle in spare part management is creating an inventory.  In order to do this effectively, it is crucial that the maintenance records of machinery are thoroughly gone over, and critical part breakdowns are identified.  Once this has been completed there you will be left with an idea of what spare parts are needed to comprise a complete operational spare part inventory.

Don’t forget when creating an inventory list to check into refurbished parts and components.  Many older pieces of equipment have become obsolete however this doesn’t mean that you can’t find parts to repair them.  Many times, obsolete equipment can be repaired using parts that can be found through companies specializing in obsolete refurbished electrical components, such as J & P Electrical Company, https://www.jpelectricalcompany.com.

Strategy of Operations

Determining whether you will function as a predictive or reactive position plays a large role in the replacement part stock that you will keep on hand.  Most manufacturers are historically known for being reactive to events like equipment failure.  In order to successfully create a functional spare part inventory, facilities must turn their focus on a more predictive approach to machine maintenance and failure. Successful predictive spare part management will include the collection and analysis of data, the ability for managers to see the operation as hole in which they foresee underlying problems and find solutions.

Inventory Control

Don’t think that your spare part inventory has to be all-encompassing to be effective. In reality that is an unrealistic goal to achieve.  Instead develop an inventory that is categorized by priority.  Recognize parts that can be used for more than one purpose, those that are critical to your operation, and those critical to a specific piece of machinery.  This needs to be revaluated on a regular basis to make sure that as new machinery is introduced they aren’t forgotten.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

Thursday, October 4, 2018

What to Avoid When Purchasing Refurbished Electrical Components

Buying refurbished electrical components such as circuit breakers, transformers, bus ducts and plugs is just one way that industrial manufacturers can save a great deal of money.  The one aspect that needs to be seriously considered is where companies purchase refurbished electrical components.  Buying from reputable refurbished manufacturers is a must when it comes to electrical components that will be used in any settings, especially the manufacturing industry.  Some companies, often less reputable offer deep discounts.  It is crucial to ensure that the savings don’t equate to an increased safety risk.   

When purchasing refurbished electrical components, especially from online companies like ebay take note to thoroughly check over equipment for damage, rust, missing pieces, or improper labeling. When buying online it is important to know exactly what you are looking for before you make a purchase.  This can help to ensure that you are sure to get exactly what you need.  Once you have developed a relationship with an online supplier through ebay or another online source you will have more confidence in purchasing through them in the future.

What to Avoid When Purchasing Refurbished Electrical Components

  • Be sure you know what you are looking to purchase. Purchasing electrical components is different than a lot of other purchases in that you should do some research to really know what you need and are looking for before you even begin researching places to purchase it.  Understand the different brands available and the part number that you are looking for.
  • Advertising and ads are meant to draw people in. Don’t get taken by an ad that doesn’t offer specifics on products that you are interested in purchasing.  You should know in detail what you are purchasing and the exact condition it is in.  Understanding the difference between new, used, and refurbished electrical components helps to make sure you are getting exactly what you expect.
  • If the information you need is not clearly listed on the products label it is important to ask questions about the product and get all answers in writing. This clear communication between seller and buyer will help prevent confusion and later disputes.
  • Never buy from a company that doesn’t have a solid track record. Before purchasing any electrical parts and components, new or used, do research on the company offering it for sale.  Does the company have reviews and testimonials?   How long have has the company been in business?  What is their return policy?  Seek out their policies; find out if there is a restocking fee if a return needs to be done, if they offer returns, or if it is exchange only. 

Questions to Ask When Buying Refurbished Parts and Components

  • Am I purchasing a new, used, or refurbished part?
  • If refurbished, what is the process, in detail, that the part goes through before it can be sold?
  • What are the company’s product guarantees and warranties?
  • Am I buying a piece that is in proper working order or is it being sold as is, for parts only?
  • What is the testing process your refurbished parts go through before they are sold?
Purchasing refurbished parts and components makes solid business sense especially in an economy where we are trying to stretch our already tight budgets.   It is important to have properly working and maintained equipment when working in any industrial manufacturing setting.  One was to ensure this occurs is to purchase your refurbished electrical components and parts from companies with a solid reputation, like J & P Electrical Company.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

Friday, September 21, 2018

Safety Hazards Within the Manufacturing Industry

Manufacturing seems to be a term that covers several different companies within a wide range of industries.  With such a wide variety of businesses, manufacturing facilities have a vast number of operational and safety practices they follow.  There is a specific organization known as the Occupational Safety and Health Administration that sets forth standards and compliance regulations for manufacturing facilities to help avoid common safety issues found within the sector.

Even though there are several different industries that make up the manufacturing sector they share a few safety concerns including:

Falls

Falls are the most common accidents that occurs within the United States.  The frequency of falls makes this the number one hazard found within the workplace, especially within manufacturing facilities.  Falls represent a serious risk for workers.  They can lead to death or injury; most falls will require at least a few days off work to recover from.  It is of the utmost importance that manufacturing facilities take special precautions to avoid falls throughout their facilities.

Machine Guarding

Heavy machinery is operated throughout many different types of manufacturing facilities which is why it is so important that proper guarding procedures are followed to keep workers safe.  Improperly installed guards on machines presents a major hazard to the safety of employees.  To keep manufacturing workers safe while operating large scaled equipment proper safety features are installed.

Electrical

Even when individuals are not directly working with electricity, such as you do as an electrician or engineer, there are still plenty of electrical risks involved in manufacturing.  Many manufacturing facilities use a system of bus ducts, plugs, and shut offs to avoid industries from electrocution.  Electric panels are kept secured in manufacturing locations as well to increase safety.  Large scaled equipment is also inspected and kept up to date with the use of reconditioned electrical components on a regular basis that helps keep equipment running smoothly before a chance of failing occurs.  Standards are in place from OSHA regarding electricity to lessen the risks involved within manufacturing facilities.

Undertrained Employees

Employees that are not properly trained for the position they are in is a problem found not only in manufacturing.  Facilities are only as safe as the people that are working within them.  It is crucial that proper training is done regularly on all pieces of equipment that workers may encounter in your facility.  When machines are replaced or even upgraded for that matter, employee re-training should be mandatory.  Exposure to proper safety training will help keep all employees throughout the facility safe.  Practicing procedures that are in place are just as important as training.  Take the time to run regular tests involving the safety procedures to ensure that they are properly executed before it becomes vital.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Friday, September 7, 2018

The Basics in Wiring Electrical Disconnect Switches

Understanding how the electrical system works in your manufacturing facility is not as difficult as you may think. While it may seem like magic how the lights turn on or how the power gets to your stuff that you plug into the wall outlet. However, it is far from magical and in fact it is quite simple really. It is not a very complex system when explained.

There are several parts that make up your electrical service, one of the most important parts being the disconnect switch. This device is designed to instantly shut off the power to your facilities main power panel. This device is a very important part of your manufacturing electrical system and should only be used in extreme conditions.

How does an electrical disconnect switch work?

The basic operation of an electrical disconnect switch is simple in that it truly has only one purpose and that is to kill the power to the main power panel for your facility. All the facilities wiring goes into the main power panel and is connected to breakers that control the power inside the building. The disconnect switch sits in line between your facilities electrical meter and main power panel.

By turning this switch off you will instantly disconnect all power going into your location, this does not however, have any effect on your electrical service. You will continue to have power at the meter and on the feeder side of disconnect switch.  It is important to know where your electrical disconnect switch is, which is also referred to as the electrical service disconnect switch.

When repairs or replacement is needed it is important to find the right parts.

Due to the seriousness of the functionality of the electrical disconnect switch only trained professionals should ever open up the disconnect switch box. This is because the feeder lines going into the switch have 240v running through them and that is enough to kill a person if you are in direct contact with it. When repairs are needed, and it becomes necessary to replace the electrical disconnect switch there are several options that will be recommended.  One of the more common options in manufacturing is budget friendly reconditioned disconnect options

When parts are needed you can insist on using reconditioned equipment.  Often reconditioned electrical components like the disconnect are preferred as they not only save you money but most often all the bugs that are found in new OEM parts have been worked out and fixed.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

Friday, August 10, 2018

Understanding Your Business’s Breaker Panel

Technology has been growing faster and faster in recent years, and your business seems to need to use it all to keep up with your competition.  All those computers and other technological devices that are helping your business grow are taking up more power and space in your business’s breaker panel, which can lead to trouble after a while.  

That means that your breaker panel eventually may not be large enough to handle everything and you may find that your company will go in the dark every so often.  There are a few signs that you should look out for to see if it is time to replace your business’s breaker panel.  One of the most noticeable things that you will see are flickering lights.  While you may think that your light bulbs just need to be changed, the fact is that you may need a new breaker panel installed instead.

Another sign may be that your panel switches keep tripping and shutting things down.  This may not be a big deal the first time that it happens, but after a while, it can affect the productivity of your work.  You should also be able to read what each panel switch is connected to, and if you can’t then it can be difficult to know which panel switches to flip when you need to cut the power to something in your office.

Strange buzzing noises or popping sounds are never a good sign either, and anything like that can quickly cause an electrical fire to start.  You may want to try to ignore many of these signs, in hopes that you can just get by to save money, but we recommend getting these things fixed immediately.
Here at we offer for sale an abundance of reconditioned electrical surplus options.  All our reconditioned breaker panels meet the strictest safety requirements, and if it weren’t for the lower cost, you would have no idea that these units were reconditioned when you look at them.

We can find a new breaker panel that will fit your current and future needs in our reconditioned electrical surplus and install it quickly, so that your business does not experience too much downtime.  Since these breaker panels are ready to go, all we need to do is hook them up and attach everything before turning them on.  This is much cheaper than rewiring and the many other options that some other electrical companies offer.

We know that your time is valuable to your business, and we have found that using reconditioned electrical surplus items can save you that time as well as a lot of money.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Thursday, July 19, 2018

How Are Bus Plugs and Ducts Used in Manufacturing?

All buildings whether commercial or residential require some sort of electrical power in order to provide lighting, outlets and other electrical devices. For commercial buildings, you have power needs for machinery, lighting, cooling systems, and other types of electrical needs. Typically, in a residential building, you have electrical service entering the house with cables. This is different then how electrical power is distributed in commercial and manufacturing settings.

Commercial buildings, especially those used by medium or large-scale manufacturing businesses use a larger type power distribution system that requires a much different way to run power through the manufacturing spaces of the building. Unlike residential power distribution which uses cables to carry the power throughout the home, commercial building use bus ducts or sheet metal runs with either aluminum or copper busbars.

History of the Busway Power Distribution System

The busway and bus bars were first introduced in the US back in the 1920's at the request of the auto industry in Detroit, Michigan. The system gave them the necessary versatility that was needed for supplying power to the assembly line equipment that was being used in the manufacturing facilities at the time. Over the years since, there have been numerous innovations that have improved on the original design and installation procedures.

Commercial Power Distribution System Components

Heavy duty machinery typically found in manufacturing plants have unique power requirements which cannot be served by typical power distribution systems that are found in most residential homes and most commercial buildings. For these unique power requirements, there is a power system that is designed especially suited for this type of need. Bus Ducts and Bus Plugs are combined to deliver the necessary power to each machine

Bus Ducts - Bus Ducts also referred to as busways are sections of sheet metal with bars attached to them that are made of either aluminum or copper.  The sections are connected together in order to reach each piece of machinery that is needing the power. This type of power distribution system requires trained, certified professional electricians to install them and ensure that they are in full operation at all times.

Bus Plugs - Bus Plugs are specially designed components that work in tandem with the busbars in a unique type of power distribution system that is typically installed in a large-scale manufacturing facility. Each bus plug is used to connect directly to busways that are running throughout building to deliver the power to equipment like large motor starters and other power switching equipment.

Indoors and Outdoors Power System

One of the benefits of using this type of system in a manufacturing facility is that it can be used both indoors and outdoors to deliver the necessary power to different parts of any operation. The unique design of the system helps to prevent voltage drops across each of the numerous sections of the bus ducting throughout the building.

The system can also be fitted with a trolley system that is designed to deliver power to equipment that is designed to move frequently. There are also cables that are used to deliver the power directly to the trolley itself.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Friday, July 6, 2018

Fused Disconnect Switch vs Circuit Breakers

For all those people who are looking for major differences between fused disconnect switches and circuit breakers, this post will eradicate all your confusions and help you to make the best choice. Before proceeding further, let’s shed some light on why you need devices such as circuit breaker panels and fused disconnect switches.

Electrical circuits in residential and commercial establishments are designed to carry a certain amount of current. Due to any reason, if more current passes through them, it can lead to dire circumstances where sensitive appliances and equipment can be destroyed. In some situations, this overflow of current through electrical circuits can also result in a fire that can prove to be extremely fatal for the inmates of the building.

In order to prevent such a situation from happening, different devises such are used that serve the purpose of protecting overcurrent in wires. These devices, in a current overflow situation, disconnect or open the circuit. This helps in preventing the fire from erupting. Thus, there are fewer chances of any damage to be caused to appliances and equipment installed in the building. Devices such as circuit breaker and fused disconnect switch also work in case of short-circuit situations.
Now that you are aware of the basic function of both these devices; let’s now have a look at major differences between them.

Fused Disconnect Switch

A fused disconnect switch, as the name suggests, is a combination of a fuse and switch. The fuse shuts the circuit off and switch disconnects it in case of an issue. Switches are designed to be shut the power off manually. On the other hand, fuse works in the opposite way. They are made up of a small filament that melt down in case of a current overflow. A fuse’s current rating is preset. Thus, when the current exceeds the rating of the fuse for a longer period of time it melts automatically. As a result, the circuit is disconnected.

A point to note here is that when a fuse disconnects the circuit, it can be used again. Power can only be restored if the fuse is replaced by a new one.

Circuit Breaker

With circuit breaker, there is no issue of getting a new fuse every time it turns the power off due to the overflow of current or short-circuit. Thus, it is often considered a better option for many appliances. Circuit breaker panels can also be turned off in a manual way as they also serve the functions of a switch. This feature makes them handy if you want to do get some electrical work done in the building.
A circuit breaker disconnects the circuit automatically with the help of an electromagnet it features when it detects overflow of current or a short-circuit. After the problems have been fixed, it only needs to be turned back on for restoring power.

A Final Word

To sum it up, both these devices can help a great deal to eliminate issues caused by the overflow of current or short-circuit. As stated above, a circuit breaker disconnects the circuit both automatically and manually and a fused disconnect switch offers the same purpose. The difference lies in their design and functionality. Thus, when selecting them, take into consideration the electrical requirements of your premises for taking the best decision.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Wednesday, June 20, 2018

How Are Circuit Breaker Panels and Disconnects Used?

Circuit Breaker Panel

A circuit breaker panel is the main point from where electricity is passed around to other electrical circuits. Power for your house comes through the service entrance which passes through the electrical meter which records the amount of voltage you use. It then flows through the circuit breaker panel. The panel usually gives out 100 to 200 amps of power. The panel, in short, is just a bunch of switches.

The service entrance wires are attached to terminals called lugs. Lugs are always energised with electricity unless your local power company shuts it off. A dead front cover, which is a metal panel, covers all the lugs and electrical wiring connected to the panel. The dead front cover provides access to every breaker and switch.

The circuit breaker panel always consists of a main breaker which is a large switch. If the main breaker is shut down, then electricity access to every other circuit is cut off as well. However, the lugs remain energised with electricity. Main breaker activity does not affect the lugs. The circuit breaker panel always has two rows for the branch circuits. It includes circuits which provide 15-20 Amps of energy for lighting or fans or other outlets in a kitchen or garage. Branch circuits which are labelled with 40-50 amps of energy are known as ‘double pole breakers’. These supply electricity to high voltage appliances such as dryers or air conditioners. A large breaker may also supply electricity to a sub-panel which is mainly used for electricity in detached r quarters. The panel also has hot & neutral bus bars. Moreover, the ground wires prevent electrocution from happening due to frayed hot wires. Many circuit breakers also consist of disconnectors.

Disconnectors

A circuit breaker disconnector is used to isolate the electrical circuit from electricity to maintain or repair it. A disconnector is only used for safety purposes and can be operated either manually or automatically. Circuit breaker disconnectors are off-loading devices which means that they do not contain the workings for controlling electric arcs and should be opened after the current is interrupted by another device.

A circuit breaker disconnect consists of a lock-out tag-out that prevents inattentive operations from happening. These locks are part of a trapped-key interlock system so that there is steady stream of operations.  A switch disconnector combines the properties of a disconnector and load switch.
In disconnecting circuit breakers, the disconnector is integrated so that there is no need to use separate disconnectors. This has the advantage of being reliable and the need for maintenance decreases. The usage of this device is, however, limited as compared to a disconnector because there may be problem which arise while maintenance takes place.

A fused disconnect is used to replace a circuit breaker as it works in the same way and is cheaper. It can turn a circuit on or off and its fuses can provide protection. Having more information about electrical breakers and disconnectors can help you in every-day life. If a small electrical problem was to arise, you’d be able to solve it yourself.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Wednesday, June 6, 2018

Using Bus Plugs and Ducts in Manufacturing

There are millions of different pieces of manufacturing equipment and electrical components on the market today that only make sense to those who use them in their line of work.  Most of which make little to no sense to those of us who don’t use them. For example, what use would you have for bus plugs and bus ducts, what are they and how do they improve manufacturing.

Bus duct and bus plugs are used to distribute power around manufacturing facilities and industrial buildings such as processing plants, metal fabricating plants, and throughout heavy manufacturing areas where the machines aren’t stationary or need to be moved around from time to time.

All manufacturing buildings are powered differently.  For example, power is distributed through hardwiring in the walls of residential buildings so as to connect to all of the electrical outlets in a room. Industrial buildings such as factories, on the other hand, feature larger open floor plans with various machinery dispersed all around the facility, none of which are near any wall or permanent structure. They require a source of power, and in this case, a giant industrial electrical plug, which is where bus plugs and ducts come in.

A bus plug is essentially a component of a busway (industrial extension cord) that is used for delivering power to the appropriate equipment and circuits. Think of a busway as the extension cord you have at home that you use to plug in several connectors, the same applies to the busway and bus plug system, they enable flexibility and can be disconnected and rearranged to allow whatever manufacturing equipment that needs to be powered on virtually any floor of an industrial building. There is no physical hard wiring to the building, a manufacturing business can bring in more equipment without having to wire or rewire the entire electrical system; they simply have to plug in a bus plug into a busway, and voila, they are up and running.

Like with many electrical systems, bus plugs also require circuit protection, which in this case, is through a circuit breaker or a fuse depending on the application. Using bus plugs and ducts is the most economical and efficient way to power large commercial facilities or manufacturing plants and feed all manufacturing equipment, particularly, in areas of the building where the power distribution keeps changing.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Thursday, May 24, 2018

5 Reasons To Consider Reconditioned Electrical Components For Manufacturing

Just because you think something is broken or doesn’t work anymore doesn’t mean it’s true. There is such a thing as product reconditioning in the electrical industry.  Companies need to be aware that this is a great way to get electrical components for your company especially if working with limited resources. Just because they are reconditioned components doesn’t mean they are of lesser quality than if you were to purchase new components.  In fact, many times the bugs and kinks have all been worked out of the reconditioned components therefore making them more valuable. Here are a few reasons why you shouldn’t think less about reconditioned electrical components and use them for your company.

Lower Costs

Every business is concerned with saving money. Buying refurbished industrial equipment will save your company a great deal of capital. On average, your company will save about 50% to 70% when buying refurbished industrial equipment over new equipment. You’ll be able to use this money in other areas of business to help you grow.

Greater Peace of Mind

Not only do reconditioned electrical components cost less, but you can rest assure that the products you’re getting are completely rebuilt, inspected and tested multiple times to make sure everything works as if it was new. Another benefit as mentioned earlier is that equipment that has been used for awhile and reconditioned has had a chance to have the kinks worked out.  Problems that often arise with new equipment have been worked out and dealt with.

More Stringent Standards

Companies that are in business to reconditioned electrical components know when a product still life has to offer.  Therefore, it is important to purchase components from a reputable company.  This will help to ensure you are getting quality parts that have been processed at the highest of standards.  You will be sure to get the best in reconditioned equipment and components.

Like New Appearance

Reconditioned electrical components are not only rebuilt and cleaned before being inspected, but they are also painted using quality paint and exclusive acrylic enamel chosen for its durability so that they look as good as new.
Increased Inspections
To ensure all refurbished industrial equipment runs right, the product is tested and re-tested again to meet or exceed the manufacturer’s UL certification.  Each component is not only cleaned but also lubricated, reassembled and thoroughly tested before being allowed to be resold.
Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Friday, May 11, 2018

7 Things to Know About During Asset Recovery

Asset recovery is the specialized technique that allows companies to go into facilities and complete electrical tear downs and manufacturing plant clean outs.  Companies specializing in asset recovery take resources that are no longer being utilized and resell them after they are put through the reconditioning process. This technique allows materials that would be normally disposed of and allows them to be sold.  Electrical surplus recovery companies do complete manufacturing plant clean outs, taking materials that are going to otherwise be disposed of and turning them into usable assets.  Below, we are going to look at the definitions that one should know during asset recovery and purchasing electrical components that are new, used, recycled, or refurbished.

Recycling:

Harmful materials and disposal costs of material waste can be reduced with recycling.  In the recycling process materials are converted during plant clean outs, generating income as well as preserving resources.

Reuse:

Equipment and electrical components often can be reused in other manufacturing facilities after a plant is closed.  Re-using equipment allows older equipment to be replaced with internal resources before the need arises to make an external purchase.  If the equipment is not currently needed but could be used in the future can be put into storage for later use.  Reusing idle equipment helps companies reduce depreciation, taxes, and capital.

Reconditioning:

This process begins with electrical components and machinery that has previously been used.  Companies recondition components by taking them completely apart and rebuilding them.  This process is done often during plant clean outs as a way of generating capital.  Components are refurbished and sold to other users at a discounted price.  The process of reconditioning reduces waste and allows companies to offer like new components for resale.

Reclaiming:

This process involves solvents, chemicals, lube oils and more that have been used to be reclaimed and reused, most often in a manner in which they weren’t initially used.  This allows companies to cut down on waste while being environmentally friendly.
Reselling:
When used or reconditioned surplus inventory is sold.  This occurs when it is no longer viable or useful to the company and there is no reason to store it for reuse later on.
These processes keep companies from literally throwing money away in dumps.  Manufacturing plant clean outs allow materials to be reconditioned or sold as used through electrical surplus recovery shops.  Companies that go in and process industrial plant clean outs greatly help companies recover capital from their previous investments.  It is important to extract every bit of value out of your initial investment.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Wednesday, April 25, 2018

Purchasing Refurbished Equipment Over New

Running a business of any kind can be an expensive endeavor, especially when it comes to companies offering any kind of manufacturing.  Manufacturing equipment has a number of pieces that are constantly in motion which leads to components needing to be replaced and maintained frequently.  One way to stay within a budget while purchasing and maintaining equipment is to look into refurbished products.   Purchasing and using refurbished equipment and replacement parts can save upwards of sixty percent when compared to new.  The best part, it is as equally as reliable especially with regular maintenance.

Pros of Purchasing Refurbished

Low Upfront Costs

When purchasing reconditioned equipment and reconditioned parts business’s can save a great deal of money.  Usually the cost of equipment, in any business, is the most expensive aspect of a new business venture.  You can start-up a new endeavor at a fraction of the cost without putting all of your money into equipment and leaving yourself without a financial cushion.

Overall Value

Purchasing equipment that has been reconditioned, especially when it comes from a reputable source with proven knowledge and experience.  When equipment is well maintained, no matter if it was brand new or purchased refurbished, it will function for years.

Wear and Tear:

The biggest benefit of purchasing refurbished equipment is that the known wear and tear on the equipment can be addressed when it is reconditioned.  If we know that an axel always fails after 4 hours of constant use, then the issue can be addressed during the refurbishment process.  Although the exterior of reconditioned equipment can show wear and tear the internal aspects will be even better than new.

There are a number of reasons that purchasing refurbished electrical components and equipment makes sense for your business.    Reconditioned components allow you to save money without sacrificing quality.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Thursday, April 12, 2018

Dispelling Myths About Reconditioned Electrical Components

Many businesses and manufacturing facilities must purchase equipment and parts for maintenance & repairs.  One of the key goals with purchasing equipment and parts is that they will serve them for the longest possible amount of time at a reasonable and affordable price.  Refurbished machinery and reconditioned parts can be a great alternative for all business owners, especially those just starting out and are working within a budget.  There are certain myths surrounding reconditioned components, especially electrical, that can deter business owners from making a purchase even when it’s the most logical option.

Below we will look at these myths and share advice on how to make a wise investment when purchasing reconditioned electrical components and refurbished machinery for your business.
  • Myth 1: Reconditioned electronics are slow and operate poorly in comparison to new components.

The truth is that how well a refurbished electrical component operates today has little to do with how new it is.  It does however, boil down to the quality of reconditioning, maintenance, and use.  New electrical components operate based on how they were constructed, and the software used to create them.
  • Myth 2: Reconditioned electrical components are junk.

Electrical components are termed as junk if they are no longer being used. However, once an old piece of electronic equipment is refurbished, it can work better than a new piece of equipment.  When reconditioning the piece issues that have been exposed over time can be addressed.  If one part is always breaking on the component, then when it is refurbished that element can be fixed properly to avoid an issue later down the road.
  • Myth 3: Refurbished gadgets and used devices are the same thing.

A used device is one that has been used and is experiencing wear and tear whereas reconditioned gadgets are those that are taken, dismantled and given a new lease on life.  This means that it is rid of issues and malfunctions that could affect how it functions. 
  • Myth 4: Reconditioned electrical components have a shorter lifespan.

Authorized refurbishing companies make significant investments on their reconditioned electrical components and as such, it is to their benefit if the refurbished equipment works for the longest time possible. So just because the electrical equipment is refurbished does not mean that it will not serve you for a long time in fact many times the exact opposite is the case.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Monday, March 26, 2018

Three Reasons Your Circuit Breakers Keep Tripping

Electrical issues tend to create a feeling of anxiety and frustration to the homeowner. In this age, reconditioned electrical components are a blessing that has helped much to improve the electrical sustainability in the home; but still, many people are not using it due to a lack of awareness. The homeowners don’t know what's wrong, but rather suddenly, they lose access to the power.

To repair the circuit breaker, they are habitual of spending lots of money repeatedly but don’t invest in refurbished electrical components because they don’t know what’s going on at the back. Let’s have a look.

Firstly, you would have to understand what is a circuit breaker trip?
It comes because of a circuit fixed to your electrical switch surpassing its sheltered parameters. They can be recognized by a sudden loss of energy to machine or loss of power in your home that is restricted to a zone.  There is a lot of issues that can bring about circuit breaker trips and following are the some of the top 3 reasons for an electrical breaker stumbling in your home.

Overload

A circuit over-loading is effortlessly the most widely recognized explanation behind a breaker trip. This basically implies that you have quite recently got excessive stuff stacked on the breaker.

Breakers have a proper safe limit of energy from which they supply to your appliances and home. In the event, if it would be exceeded, the breaker will trip. You will witness this frequently when you endeavor to introduce another appliance where your electrical framework cannot bolster it, or if you connect to a powerful machine like a space radiator in a zone that does not have the entrance to safe amperage.

For example: If anyone has a 20-amp electrical circuit with 25 amps of electrical current running through it and at some time if you are using iron, hair dryer, and washing machine, then eventually the circuit breaker will trip to save itself from preheating.

Short-Circuiting

This thing happens when a hot wire encounters another hot wire(s). You will generally observe darkening around the outlet or burning smell when this happens. Also, in case you are managing a short-out, don't interface with your outlet by any means. Leave the breaker tripping, and call emergency help as soon as possible.

Ground Fault

A ground fault is genuinely like a short circuit, if not indistinguishable. The distinction is in the collaboration. A ground fault is a point at which a hot wire meets your establishing wire, and along these lines, the protected establishing of your outlet winds up void and dangerous. Handle this in a similar way you would do the precautions with the short circuit.

Now you would have an idea about the reasons why your circuit breakers keep tripping and what you should do when it does.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Thursday, March 8, 2018

What Should You Avoid When Buying Refurbished Electrical Components?

Opting to buy reconditioned or refurbished electrical components has many benefits some that only your wallet can thank you for. Provided the reconditioned electrical components performs as they should, buying a used item for a lot less saves you quite a chunk of change, especially when it’s not financially feasible to buy a new electrical component. There are, however, certain risks involved in buying refurbished electrical components, particularly when you don’t know what to look out for.

You may start by asking yourself why the owner of said refurbished electrical component is selling the item(s) to begin with. The price might be right on the scope of your budget, but you might end up inheriting a costly problem that you have to contend with until you can re-sell it or buy another one altogether. You also may need to keep in mind that it might be hard to find spare parts of a used electrical component, which may also cost you an arm and a leg to have them repaired. Consider the following things that you certainly must avoid when buying refurbished electrical components:

Reputable Source

You finally find the component you have been looking for, the price is right, and it’s just a click away. But wait, with so many counterfeit parts available out there, how do you know that it is the real thing? When buying refurbished electronic components always look for a trusted source and crosscheck certain things such as how long they have been in business, including feedback and reviews from past customers, which ideally should be mostly positive because, well, you can’t please everyone. Reconditioned or refurbished electrical components that can be traced back to the manufacturer are probably ideal to purchase.

 Cosmetic Imperfections

This should go without saying that a visual inspection of a reconditioned electrical component is of great importance. Even when being sold by a retail trader as “new old stock” or “used,” the electrical component should be in its original packaging where packaging is applicable even if the packaging shows a little shelf wear and tear or possibly opened. The electrical component should be cleaned, inspected and deemed fully operational within the manufacturer's specifications even with noticeable cosmetic imperfections, such as paint wear or product scratches.

Refurbished electrical components will not always be in their original packaging. However, they are Okay to purchase provided they have been repaired by the manufacturer or manufacturer's authorized service, they meet with all the manufacturer’s specifications and is in excellent condition

Missing Information

Do not buy a refurbished electrical component from an advert that doesn’t give you all the key product specifications, including how long it’s been used, its accessories, illegible labeling, the warranty if applicable, as well as the return policy, etc. Whoever you chose to buy from should also be able to answer all your questions to ensure that you can get your money back if the refurbished electrical component doesn’t work as it’s supposed to.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Wednesday, February 21, 2018

Four Rules for Electrical Safety After A Flood

Ensuring electrical safety after a flood must take precedence over salvaging any remains or inspecting the home. The reason: water and electricity do not mix! It is understandable that you are very eager to check on your belongings, to try to get things back to normal as soon as possible. However, there is always a high risk of electrocution after flooding and of course, no material belongings are worth facing any risks and hazards associated with live electricity in your apartment. Here are few practical tips that will help you ensure electrical safety after a flood.

Stay Away from A Flood-Damaged Basement

A flooded basement may have live electrical wires that you are not aware of. While it is easy to think you can really avoid meeting such wires, even the water may not be safe. It would be best to contact an electrician to ensure the home’s electrical meter is removed from the socket to ensure the house is totally disconnected from the grid. This is an ideal way to shut off all power to the house as there can still be an electrocution even if you have lost power – telephone wires, the cable wire or other wires may have electricity due to shorting and contact from outside electricity.

If there is Power Outage, Do Not Assume It Would Remain Off

After flooding, there may be widespread power outage from the municipal electricity supply. However, it is not ideal to rely on the power outage from the general supply for safety after a flood as power may be restored at any time. Never rely on the municipality utility but take steps to shut off the power from your own apartment.

Do not operate the HVAC Equipment until it is inspected

Flooding may sometimes affect the ductwork and could even flow into parts of your air conditioning system or some areas that may appear dry. The HVAC system could be a big electrical risk if powered up without inspection. Ensure a qualified HVAC specialist checks the system before power is restored.

Dispose Electrical Equipment Affected by Flood

After water in your apartment has been pumped out and recovery efforts have begun, you would need to dispose any electrical equipment affected by the flood. Items such as armored cable, fuse boxes, building wire, switches, air conditioners, heaters, circuit panels and breakers and any items that cannot be salvaged must be disposed to avoid any potential risks and dangers while they are in use.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Thursday, February 8, 2018

Different Types of Electrical Switches

We use electrical switches every single day in our lives. Whether they are used to turn on the light or if they are used indirectly while using computers and other appliances, switches are one of the most common electrical accessory around. There are a number of different electrical switches we can use, each having its own unique purpose and use. The type of electrical switch we need to use depends on what we need to use it for. It is a secondary accessory that is highly dependent on the primary accessory it supports. Out of all the switches available in the market, two are highly common and of great use: panel switches and line switches. Let’s have a more detailed look into the two most common types of electrical switches that are in use today.

Panel Switch

Panel switches were developed in the 1910s by Western Electric labs and introduced in the Bell System. Panel switches became used as early types of automatic telephone systems. Known for their huge panel like structure, panel switches are basically very tall strips of layered terminals that are separated by a fine layer of insulation between them. First installed in 1915, the panel switch became the go to method for phone terminals.

That is, however, just one type of panel switch. The second type is far more common and known to almost everyone. Common panel switches are the ones we see on our walls. Most of the switches in our homes are arranged in a panel arrangement. It is basically a plastic panel fitted in the wall with multiple switches embedded in it. This makes it easier for people to switch multiple appliances off or on since the switches are arranged together in the same place.

Line Switch

Much like common panel switches, line switches are very popular as well. In fact, they are perhaps the go to switches to attach to smaller electric appliances. Lamps especially almost always line switches. Line switches carry a relatively smaller load than panel switches and are used for electrical appliances you do not commonly use. An analogy can be drawn with toys that have their own specific switch for use whenever it needs to be used.

In that manner, line switches are commonly used for appliances that are rarely turned on. Lamps, decoration pieces, fountain lights, and disco lights are all common appliances that have line switches attached. Line switches are fairly simple and can be fixed or attached by anyone who has an idea about how to. However, panel switches are often very complex since they are attached to wires from all around a room, or even the entire house! This makes them too difficult for common people to understand, and they cannot find and fix faults on their own. Therefore, whenever there’s a fault with a panel switch it is important to hire a professional for repair or replacement.  You can purchase a new one or a refurbished switch, both will have gone through rigorous testing before making it to you the consumer.

Contact Us Today

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Thursday, January 25, 2018

Significant Savings Seen Using Refurbished Electrical Components

In order to be successful in business, we need to be a tad prudent with how money is spent or re-invested into the business and purchasing. Is purchasing a new piece of electrical equipment the best investment, or does capitalizing on an opportunity to purchase quality refurbished electrical components at a significant savings make a viable economic sense?

Pros and Cons

Buying refurbished electrical components has its pros and cons. The pros, it is a great way to save money and in most cases the brand name equipment are built to last. Cons, it can mean money down the drain only when you don’t buy the electrical component from a reputable source and you could end up with an item that is even more damaged or missing integral parts.
Surplus electrical components can come from a few locations:
  • Assets are recovered from manufacturing plants that are closing. The surplus electrical components are then refurbished and sold at a discount.
  • Assets can be recovered from machines that are being disposed of but still have working components. Resulting in one of two situations, the components are refurbished and resold or the entire machine is refurbished.
While one of the benefits of buying reconditioned electrical components is that the items are generally set at a significantly lower price and some equipment contractors will accept returns if an item is ‘defective,’ the down side to this is that you will not get a manufacturer’s warranty.

What Does Reconditioned Mean?

Reconditioned electrical are components that are being repurposed.  They can’t be passed or sold as brand-new products but are instead reconditioned. Whether they are damaged or not, reconditioned electrical components also known as ‘remanufactured’ electrical components are completely disassembled and restored if need be in order to ensure that they perform as expected.

Therefore, before bidding on refurbished electrical components online, there are a few things to keep in mind and if possible ask questions about the item on sale. If it’s a refurbished electrical component be sure to ask about the companies return policies.

Be Cautious Where You Get Refurb Parts From

For a refurbished electrical component, beware of as it may arrive in worse conditions than the actual online photos however you are guaranteed of its safety and reliability. With most resellers and reconditioning companies, you will not be stuck with a defective refurbished electrical component if it is in fact not the right component to fix your machines issue.  An ad may give you all the specifics about the item you are about to purchase and check the seller’s feedback and buyers’ recommendations.  It is important to buy from reputable companies.  This helps to ensure that the reconditioned components that you are purchasing are as good as brand-new OEM electrical parts.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Thursday, January 4, 2018

The Importance of Using Refurbished Electrical Components

Most of the industry experts these days are looking forward to being able to use refurbished electrical equipment and replacement components on their manufacturing lines. Although many people have misconceptions about using refurbished components such as transformers, bus ducts, panel switches, circuit breakers, and such however the truth is that reconditioned machines and components offer a variety of benefits for your workplace.
Importance of using refurbished electrical components can be highlighted from below points:

Reduced cost:

One of the biggest benefits of using refurbished electrical component at industrial processing is that they are cheaper as compared to other identical solutions. The components that come after refurbishing process usually have low selling price irrespective of the reason why manufacturer renewed it. It will help you to save somewhere between 25 to 50 percent on your component purchase.

They come out of rigorous inspection process:

Components that are available at lower price range does not mean to present lower quality. Instead, the refurbished components undergo the more careful testing process. It doesn’t matter what wrong happened to the product before refurbishing process, manufacturers always prefer to follow careful inspection to ensure the best performance. It means you will be able to buy many superior components at the lower price range.

Ease in availability:

Most of the components get obsolete from the market with time and if some specific product lines need them it becomes a challenging task to find the lot again. But the surplus components are the best choice to find components of such limited lots. On time availability of these difficult to find components will help you to avoid downtimes at your workplace. Most of the refurbished products are generally available with same day shipping service.

They come with a warranty:

Just because you are buying Surplus Electrical Components for your product assembly lines, it doesn’t mean that they will not last long. As per market reviews, the refurbished components usually have more life and they also come with a warranty. Most of the manufacturers offer around 12 months warranty on their refurbished component collections so you can find them a trustworthy solution for your industry. Most of these components are certified that they will work safely and same as original ones.

The biggest benefit of buying refurbished components is that you can get services for parts that are outdated, and their production is stopped by the original manufacturer. If you are planning to repair your old pieces of electrical equipment and need same components for replacement, the surplus collection is the best choice to keep working without facing any trouble.

To ensure safe purchase of refurbished components, you must check the policy of the company. It is important to look for a vendor that ensures quality refurbishing of components with safe cleaning process including proper analysis, testing and rigorous inspections. The price range of refurbished components also varies company to company, so it is good to check with various vendors and compare their prices to ensure the best buy services. Once you can find a right seller that guarantees safe operation of refurbished components, you can use them safely at your manufacturing lines.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at https://www.jpelectricalcompany.com/products.php.  To contact one of our product reconditioning specialists call 877.844.5514 today.